The Greenhouse Company
The Most Reliable Greenhouse Controller for Single Zone Greenhouses.
Columbia, SC – The Greenhouse Command Center is designed to operate all equipment required to ventilate, cool, and heat a single zone greenhouse. It can operate a louver for first stage ventilation, a motorized vent for maximum ventilation, an evaporative cooling system, circulation fans, up to two heaters, and two exhaust fans, one of which can be a two-speed fan.
The Greenhouse Command Center operates 5 stages of cooling and a single stage of heating. It is a pre-wired controller with a numbered terminal strip for all connections. The controller package includes all programming, layout, and wiring information; however, for convenience, the system is pre-programmed to be fully functional as soon as initialized.
The system is programmed with a logical progression of equipment staging so that no equipment operates unnecessarily. The naturally aspirated shielded temperature sensor is located in a forward quadrant, rather than centrally located, to further reduce unnecessary cycling of equipment.
Features
• All stages pre-programmed for the user’s convenience.
• 5 stages of cooling and 1 stage of heating.
• First stage fan may be single speed or two speed.
• All components enclosed and protected in a NEMA12 panel box.
• Keeps motorized vent open one extra stage on cool down to further dry evaporative cooling pads.
• Temperature sensor supplied with 50 foot cable for remote mounting.
About the Greenhouse Company:
The Greenhouse Company was founded over 42 years ago and today is one of the largest manufacturers of greenhouses in North America. As the exclusive manufacturer of J?derloon® greenhouses, The Greenhouse Company guarantees you will be 100 percent satisfied.
